PE Film for Tube Packaging
Appropriate C.O.F, low eutectic point and excellent printability.
Overview:
Appropriate C.O.F, low eutectic point and excellent printability.
Application:
1. Surface printing for tube packaging;
2. PE and AL extrusion-laminated by EAA for tube packaging.
Specification:
Thickness 25-200μm, width 250-2550mm, length customized, core inner diameter 3”(76mm).
General Properties:
Item | White PE for Outer Layer | High Transparent PE for Outer Layer | Transparent PE for Inner Layer | |
---|---|---|---|---|
Tensile Strength (MPa) | MD | ≥20 | ≥20 | ≥20 |
TD | ≥20 | ≥20 | ≥20 | |
Elongation (%) | MD | ≥500 | ≥500 | ≥500 |
TD | ≥500 | ≥500 | ≥500 | |
Heat Seal Strength(N/15mm) | ≥8 | ≥8 | ≥8 | |
Coefficient of Friction | ≥0.35 | ≥0.35 | ≤0.3 | |
Wetting Tension | ≥40 | ≥40 | ≥40 | |
Haze | / | ≤23 | ≤32 | |
Particle | ≤10/㎡, maximum diameter≤0.1mm |
The data herein is measured on products which are reliable yet not guarantee value.
For further information please feel free to contact us. We will get back to you in 24 hours.